အသုံးချနည်း

ပြင်ဆင်ရန်

Use the following infobox for all types of hydroelectric power stations involving dams. For all types of pumped-storage, wave, and tidal power stations, please use {{Infobox power station}}.

{{{name}}}
{{{image_alt}}}
{{{image_caption}}}
{{{location_map_alt}}}
{{{location_map_alt}}}
{{{location_map_caption}}}
နိုင်ငံ{{{country}}}
တည်နေရာ{{{location}}}
ကိုဩဒိနိတ်0°N 0°E / 0°N 0°E / 0; 0
အခြေအနေ{{{status}}}
စတင် ဆောက်လုပ်ခြင်း{{{construction_began}}}
ဖွင့်လှစ်သည့်နေ့{{{opening}}}
ဖြိုဖျက်သောနေ့{{{demolished}}}
ကုန်ကျငွေ{{{cost}}}
ပိုင်ဆိုင်သူများ{{{owner}}}
တမံနှင့်ရေပိုလွှဲများ
ရေပိုလွှဲအမျိုးအစား{{{spillway_type}}}
ရေပိုလွှဲသိုလှောင်နိုင်မှု{{{spillway_capacity}}}
မြစ်/ချောင်း{{{dam_crosses}}}
ဓာတ်အားပေးစက်ရုံ
အော်ပရေတာများ{{{plant_operator}}}
ကော်မရှင် နေ့ရက်{{{plant_commission}}}
ဖျက်သိမ်း ရက်စွဲ{{{plant_decommission}}}
ရေအားလျှပ်စစ်ထုတ်လုပ်မှုအမျိုးအစား{{{plant_type}}}
တာဘိုင်များ{{{plant_turbines}}}
တပ်ဆင်အင်အား{{{plant_capacity}}}
နှစ်စဉ် ထုတ်လုပ်နိုင်မှု{{{plant_annual_gen}}}
ဝဘ်ဆိုဒ်
{{{website}}}
{{{extra}}}
{{Infobox dam
| name                  = 
| name_official         = 
| image                 = 
| image_size            = 
| image_caption         = 
| image_alt             = 
| location_map          = 
| location_map_size     = 
| location_map_caption  = 
| location_map_alt      = 
| coordinates           = <!-- {{coord|..|..|type:landmark|display=inline,title}}-->
| country               = 
| location              = 
| purpose               = 
| status                = 
| construction_began    = 
| opening               = 
| demolished            = 
| cost                  = 
| builder               = 
| owner                 = 
| operator              = 
| dam_type              = 
| dam_crosses           = 
| dam_height_foundation = 
| dam_height_thalweg    = 
| dam_length            = 
| dam_elevation_crest   = 
| dam_width_crest       = 
| dam_width_base        = 
| dam_volume            = 
| spillway_count        = 
| spillway_type         = 
| spillway_capacity     = 
| res_name              = 
| res_capacity_total    = 
| res_capacity_active   = 
| res_capacity_inactive = 
| res_catchment         = 
| res_surface           = 
| res_max_length        = 
| res_max_width         = 
| res_max_depth         = 
| res_elevation         = 
| res_tidal_range       = 
| plant_name            = 
| plant_coordinates     = 
| plant_operator        = 
| plant_commission      = 
| plant_decommission    = 
| plant_type            = 
| plant_hydraulic_head  = 
| plant_turbines        = 
| plant_capacity        = 
| plant_capacity_factor = 
| plant_annual_gen      = 
| website               = 
| extra                 = 
}}

Parameter names and descriptions

ပြင်ဆင်ရန်
Parameter name Description
name Name of dam.
name_official Official name, if different from name. Preferably in native language.
image Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed.
image_size Value to overrides the default 250px.
image_caption Caption beneath image.
image_alt Alternative text for image.
location_map Name of a location map file. The coordinates must be specified as well (see below).
location_map_size Value to overrides the default 250px.
location_map_caption Caption beneath location map.
location_map_alt Alternative text for location map.
coordinates Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise.
country Country where the facility is located. Do not use flag icons.
location General area where located. Avoid being overly-detailed.
purpose Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes,
consider using: Multi-purpose. Field codes:
F=Flood control, I=Irrigation, N=Navigation, P=Power.
status Current status of the project. Enter any one of the following auto-expanding fields:
D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began Date construction began, consider using {{Start date}}.
opening Date, or future date, of inauguration. Consider using {{Start date}}.
demolished Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost Total cost of development.
owner Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.
Example: Owner1: 60% <br/>Owner2: 40%
operator Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type Type of dam. Enter any one of the following auto-expanding fields:
A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.
dam_crosses Body of river or stream below dam
dam_height Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation Height over foundation bed, with metric conversions.
dam_height_thalweg Height over thalweg (riverbed), with metric conversions.
dam_length Length of dam crown, with metric conversions.
dam_elevation_crest Height of the dam's crest above sea level, with metric conversions.
dam_width_crest Width at crest of dam, with metric conversions.
dam_width_base Width at base of dam, with metric conversions.
dam_volume Volume of material in the dam structure.
spillway_count Number of spillways.
spillway_type Type of spillway.
spillway_capacity Capacity of spillway.
RESERVOIR
res_name Name of upstream body of water, if different than "dam_crosses".
res_capacity_total Capacity of reservoir, i.e. megalitres.
res_capacity_active The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive The inactive or dead capacity (storage) of the reservoir.
res_catchment Area of catchment for reservoir.
res_surface Surface area (top water level) of reservoir.
res_max_length Length of the reservoir at normal levels, with metric conversions.
res_max_width Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth Maximum water depth of reservoir.
res_elevation The reservoir's height above sea level at normal levels, ith metric conversions.
res_tidal_range Tidal range, if applicable.
POWER STATION
plant_name Name of plant, if applicable.
plant_operator Operator(s) of the hydroelectric power plant.
plant_coordinates Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise.
plant_commission Power plant commissioning date. May be different than dam opening date.
plant_decommission Power plant decommissioning date. May be different than dam closing date.
plant_type Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head Hydraulic head at power station.
plant_turbines Number of turbines, with respective rated capacity.
plant_capacity Current gross installed capacity in megawatts, or planned capacity for those under development.
For those which are operational, but with additional under development, please add only the current installed value.
plant_capacity_factor Capacity factor of the power station, in percentage.
plant_annual_gen Average annual gross power generation. For a single-year value, adding the year in brackets is encouraged.
website Raw wikitext for entering website(s). Use [brackets] where appropriate
extras Free form, spans both columns. Use sparingly.